SVDConv utility

SVDConv is a command-line utility to validate CMSIS-SVD files and to generate CMSIS-compliant device header files. SVDConv is distributed with the ARM::CMSIS Pack (in the CMSIS\Utilities directory) together with the CMSIS-SVD.xsd schema file. SVDConv is available for Windows and Linux operating systems.

SVDConv performs the following operations:

• Checks the syntactical and structural compliance with the specified CMSIS-SVD format.
• Checks the consistency, correctness, and completeness of the CMSIS-SVD file against the CMSIS-SVD schema file.
• Generates CMSIS-compliant device header files, which can be used for software development.

Note

Consider using --strict option to receive all pedantic warnings. Some rules are skipped by default due to backward compatibility reasons. All newly developed/updated SVD files should rather respect all rules.

Operation

SVDConv is invoked form the command line. The general command format is:

SVDConv.exe <SVD_file> <options>

 

<options>	Short Name	Description
none	Validation	Perform a validation check of the SVD file. Errors and warnings are printed on screen.
-b	Log File	Specify the log file name for writing messages. Default: screen.
-o	Output Path	Specify an output path for the generated device header file or log file. Default: current directory.
--generate=header	Generate Device Header File	Generates the device header file. The name of the generated file is derived from the value of the tag <devicename> in the CMSIS-SVD file. Refer to device.
--generate=partition	Generate Partition file for Cortex-M Security Extensions (Armv8-M)	Generates the device partition file. The name of the generated file is composed of partition_ and the value of the device <name> (for example, partition_CMSDK_ARMv8MBL.h). Refer to /device element. The content of the file uses Configuration Wizard annotations and is derived from the SAU-specific information of the /device/cpu/sauRegionsConfig element and the interrupts specified in the /device/peripherals element.
--fields=enum	Bit-field Enums	Generates enum lists for each field value description contained in the CMSIS-SVD input file. Must be used in combination with --generate=header.
--fields=macro	Bit-field Macros	Generates position and mask C-Macros for each field description contained in the CMSIS-SVD input file. Must be used in combination with --generate=header.
--fields=struct	Bit-field Structs	Generates bit fields for each field description contained in the CMSIS-SVD input file. Must be used in combination with --generate=header.
--fields=struct-ansic	ANSI Bit-field Structs	Generates MISRA-compliant structures for each bitfield. The generated code is not CMSIS-compliant! Must be used in combination with --generate=header.
--strict	Strict error checking	RECOMMENDED! Applies strict error checking and generates a lot more messages.

Return Codes

SVDConv returns the following codes:

Code	Description	Action
0	OK	No action required. Validation and conversion performed without errors.
1	WARNINGS	Warnings should be checked an possibly removed. The header file is created and could be used.
2	ERRORS	Errors in the SVD description file. Important elements are missing and must be corrected.
3	Error in command line	Check and correct the command line arguments.

Examples

1. Retrieve help information on screen.

   SVDConv 

   
   
2. Perform a consistency check by passing only the SVD file name. Errors and warnings are printed on screen.

   SVDConv ARM_Example.svd 

   
   The result is printed on screen:

      MVCM3110.svd(1688) : info
      <description> missing for value '2 : MODE2'
      MVCM3110.svd(1692) : info
      <description> missing for value '3 : MODE3'
      MVCM3110.svd(1696) : info
      <description> missing for value '4 : MODE4'
      Area of improvements:
      * Description contains 267 <fields> defined without associated <enumeratedValues>
      Found 0 Errors and 1 Warnings
      Return Code: 1 (WARNINGS)

   
   
3. Generate the header file. Performs a consistency check. Errors and warnings are printed on screen.

   SVDConv ARM_Example.svd --generate=header

   
   Code snippet from the generated header file showing the structure for TIMER0.
   

   /* ================                     TIMER0                     ================ */
   typedef struct {                                    
     __IO uint32_t  CR;                                
     __IO uint16_t  SR;                                
     __I  uint16_t  RESERVED0[5];
     __IO uint16_t  INT;                               
     __I  uint16_t  RESERVED1[7];
     __IO uint32_t  COUNT;                             
     __IO uint32_t  MATCH;                             
     union {
       __O  uint32_t  PRESCALE_WR;                     
       __I  uint32_t  PRESCALE_RD;                     
     };
     __I  uint32_t  RESERVED2[9];
     __IO uint32_t  RELOAD[4];                         
   } TIMER0_Type;

   
   
4. Generate the header file containing bit fields. Performs a consistency check. Errors and warnings are printed on screen.

   SVDConv ARM_Example.svd --generate=header --fields=struct

   
   Code snippet from the generated header file showing the structure for TIMER0.
   Compare to the code snippet above.

   /* ================                     TIMER0                     ================ */
   typedef struct {                                    
     union {
       __IO uint32_t  CR;                              
       struct {
         __IO uint32_t  EN         :  1;               
         __O  uint32_t  RST        :  1;               
         __IO uint32_t  CNT        :  2;               
         __IO uint32_t  MODE       :  3;               
         __IO uint32_t  PSC        :  1;               
         __IO uint32_t  CNTSRC     :  4;               
         __IO uint32_t  CAPSRC     :  4;               
         __IO uint32_t  CAPEDGE    :  2;               
              uint32_t             :  2;
         __IO uint32_t  TRGEXT     :  2;               
              uint32_t             :  2;
         __IO uint32_t  RELOAD     :  2;               
         __IO uint32_t  IDR        :  2;               
              uint32_t             :  3;
         __IO uint32_t  S          :  1;               
       } CR_b;                                         
     };
     
     union {
       __IO uint16_t  SR;                              
       struct {
         __I  uint16_t  RUN        :  1;               
              uint16_t             :  7;
         __IO uint16_t  MATCH      :  1;               
         __IO uint16_t  UN         :  1;               
         __IO uint16_t  OV         :  1;               
              uint16_t             :  1;
         __I  uint16_t  RST        :  1;               
              uint16_t             :  1;
         __I  uint16_t  RELOAD     :  2;               
       } SR_b;                                         
     };
     __I  uint16_t  RESERVED0[5];
     
     union {
       __IO uint16_t  INT;                             
       struct {
         __IO uint16_t  EN         :  1;               
              uint16_t             :  3;
         __IO uint16_t  MODE       :  3;               
       } INT_b;                                        
     };
     __I  uint16_t  RESERVED1[7];
     __IO uint32_t  COUNT;                             
     __IO uint32_t  MATCH;                             
     union {
       __O  uint32_t  PRESCALE_WR;                     
       __I  uint32_t  PRESCALE_RD;                     
     };
     __I  uint32_t  RESERVED2[9];
     __IO uint32_t  RELOAD[4];                         
   } TIMER0_Type;

Error and Warning Messages

The following table shows the errors and warnings issued by svdconv.

Help messages

Message Number	Type	Message Text	Details/Action
M020	TEXT	SVD_STRING_OPTIONS	Displays programm help.
M021	TEXT	'DESCR' 'VER' 'COPYRIGHT'	Displays module name 'DESCR', version 'VER' and copyright information 'COPYRIGHT'.
M022	TEXT	Found 'ERR' Error(s) and 'WARN' Warning(s).	Displays the number of errors/warnings.
M023	TEXT	Phase 'CHECK'	Information about the check phase.
M024	TEXT	Arguments: 'OPTS'	Specify arguments.

Informative messages

Message Number	Type	Message Text	Details/Action
M040	Info	'NAME': 'TIME' ms. Passed
M041	Info	Overall time: 'TIME' ms.
M050	Info	Current Working Directory: 'PATH'
M051	Info	Reading SVD File: 'PATH'
M061	Info	Checking SVD Description

Invocation errors

Message Number	Type	Message Text	Action
M101	ERROR	Unknown error!	Please contact support.
M102	ERROR	MFC initialization failed	Please contact support.
M103	ERROR	Internal Error: 'REF'	Please contact support.
M104	CRITICAL	'MSG'	Please contact support.
M105	ERROR	Cannot add Register to group sorter: 'NAME'
M106	ERROR	Command 'NAME' failed: 'NUM': 'MSG'
M107	ERROR	Lost xml file stream.	Check SVD file.
M108	ERROR	SfrDis not supported.Disassembly not supported.
M109	ERROR	Cannot find 'NAME'	Check specified file.
M111	PROGRESS	'NAME' failed	Check specified file.
M120	ERROR	Invalid arguments!	Provide a list of valid arguments.
M121	ERROR	File not found 'NAME' Check specified file.
M122	ERROR	Name of command file should follow '@'	Check specified command.
M123	ERROR	File not found: 'PATH'!	Check speficied path.
M124	ERROR	Cannot execute SfrCC2: 'PATH'!"	Check path to SfrCC2.
M125	WARNING	SfrCC2 report: 'MSG' SfrCC2 report end.
M126	WARNING	SfrDis: 'MSG'
M127	ERROR	SfrCC2 reports errors!	Check SVD file.
M128	WARNING	SfrCC2 reports warnings!	Check SVD file.
M129	ERROR	Option unknown: 'OPT'	Check given option 'OPT'.
M130	ERROR	Cannot create file 'NAME'	Check user rights.
M132	ERROR	SfrCC2 report: 'MSG' SfrCC2 report end."

Validation errors

Message Number	Type	Message Text	Action
M201	ERROR	Tag <'TAG'> unknown or not allowed on this level."	Check tag
M202	ERROR	Parse error: <'TAG'> = 'VALUE'	Check tag/value.
M203	ERROR	Value already set: <'TAG'> = 'VALUE'	Check tag/value.
M204	ERROR	Parse Error: 'VALUE'	Check value.
M205	WARNING	Tag <'TAG'> empty	Assign value to tag.
M206	ERROR	DerivedFrom not found: 'NAME'	Check derivate.
M207	ERROR	Expression marker found but no <dim> specified: 'NAME'	Specify dimension.
M208	ERROR	Ignoring <dimIndex> because specified <name> requires Array generation.	Generate an array.
M209	WARNING	CPU section not set. This is required for CMSIS Headerfile generation and debug support.	Add CPU section.
M210	WARNING	Use new Format CMSIS-SVD >= V1.1 and add <CPU> Section.	Update schema and add CPU section.
M211	ERROR	Ignoring 'LEVEL' 'NAME' (see previous message)
M212	ERROR	Address Block <usage> parse error: 'NAME'	Correct address block.
M213	ERROR	Expression for 'NAME' incomplete, <'TAG'> missing.	Add tag.
M214	ERROR	Peripheral 'NAME' <dim> single-instantiation is not supported (use Array instead).	Correct Regs to Reg[s].
M215	WARNING	Size of <dim> is only one element for 'NAME', is this intended?	Check single element.
M216	WARNING	Unsupported character found in 'NAME' : 'HEX'.	Correct name.
M217	WARNING	Forbidden Trigraph '??CHAR' found in 'NAME'.
M218	WARNING	Unsupported ESC sequence found in 'NAME' : 'CHAR'.	Correct escape sequence.
M219	ERROR	C Code generation error: 'MSG'
M220	WARNING	C Code generation warning: 'MSG'
M221	WARNING	Input filename must end with .svd: 'NAME'	Correct input filename extension.
M222	WARNING	Input filename has no extension: 'NAME'	Correct input filename extension.
M223	ERROR	Input File Name 'INFILE' does not match the tag <name> in the <device> section: 'NAME'	Correct the MCU name.
M224	WARNING	Deprecated: 'NAME' Use 'NAME2' instead	Update SVD file.
M225	ERROR	Upper/lower case error: 'NAME', should be 'NAME2'"	Update SVD file.
M226	ERROR	SFD Code generation error: 'MSG'
M227	WARNING	SFD Code generation warning: 'MSG'
M228	ERROR	Enumerated Value Container: Only one Item allowed on this Level!	Remove additional items.
M229	ERROR	Register 'NAME' is not an array, <dimArrayIndex> is not applicable	Correct SVD.
M230	ERROR	Value 'NAME':'NUM' out of Range for 'LEVEL' 'NAME2'['NUM2'].	Correct SVD.
M231	ERROR	Value <isDefault> not allowed for 'LEVEL'.	Correct SVD.
M232	ERROR	Tag <'TAG'> name 'NAME' must not have specifier 'CHAR'. Ignoring entry."	Correct SVD.
M233	ERROR	Parse error: <'TAG'> = 'VALUE'	Correct SVD.
M234	ERROR	No valid items found for 'LEVEL' 'NAME'	Correct SVD.
M235	ERROR	'LEVEL' 'NAME' cannot be an array.	Correct SVD.
M236	ERROR	Expression for <'TAG'> 'NAME' not allowed.	Correct SVD.
M237	ERROR	Nameless 'LEVEL' must have <'TAG'>.	Correct SVD.
M238	ERROR	'LEVEL' must not have <'TAG'>."	Correct SVD.
M239	ERROR	Dimed 'LEVEL' 'NAME' must have an expression.	Correct SVD.
M240	ERROR	Tag <'TAG'> unknown or not allowed on 'LEVEL2':'LEVEL'.	Correct SVD.
M241	ERROR	Parse Error: 'VALUE' invalid for Array generation	Correct SVD.
M242	WARNING	'LEVEL' 'NAME' <dimArrayIndex> found, but no <dim>	Correct SVD.
M243	WARNING	'LEVEL' 'NAME' <dimArrayIndex> found, but <dim> does not describe an array	Correct SVD.

Data Check Errors

Message Number	Type	Message Text	Action
M301	ERROR	Interrupt number 'NUM' : 'NAME' already defined: 'NAME2' 'LINE'
M302	ERROR	Size of Register 'NAME':'NUM' must be 8, 16 or 32 Bits
M303	WARNING	Register name 'NAME' is prefixed with Peripheral name 'NAME2'	RegName = USART_CR ==> USART->USART_CR
M304	WARNING	Interrupt number overwrite: 'NUM' : 'NAME' 'LINE'
M305	ERROR	Name not C compliant: 'NAME' : 'HEX', replaced by '_'
M306	ERROR	Schema Version not set for <device>.
M307	ERROR	Name is equal to Value: 'NAME'
M308	ERROR	Number of <dimIndex> Elements 'NUM' is different to number of <dim> instances 'NUM2'
M309	ERROR	Field 'NAME': Offset error: 'NUM'
M310	ERROR	Field 'NAME': BitWidth error: 'NUM'
M311	ERROR	Field 'NAME': Calculation: MSB or LSB == -1
M312	ERROR	Address Block missing for Peripheral 'NAME'
M313	ERROR	Field 'NAME': LSB > MSB: BitWith calculates to 'NUM'
M314	ERROR	Address Block: <offset> or <size> not set.
M315	ERROR	Address Block: <size> is zero.
M316	ERROR	'LEVEL' <name> not set.
M317	WARNING	'LEVEL' <description> not set.
M318	WARNING	'LEVEL' 'NAME' <'TAG'> is equal to <name>
M319	WARNING	'LEVEL' <'TAG'> 'NAME' ends with newline, is this intended?
M320	WARNING	'LEVEL' <description> 'NAME' is not very descriptive
M321	WARNING	'LEVEL' <'ITEM'> 'NAME' starts with '_', is this intended?
M322	ERROR	'LEVEL' 'ITEM' 'NAME' is meaningless text. Deleted.
M323	WARNING	'LEVEL' <'ITEM'> 'NAME' contains text 'TEXT'
M324	ERROR	Field 'NAME' 'BITRANGE' does not fit into Register 'NAME2':'NUM' 'LINE'
M325	ERROR	CPU Revision is not set"
M326	ERROR	Endianness is not set, using default (little)
M327	ERROR	NVIC Prio Bits not set or wrong value, must be 2..8. Using default (4)
M328	WARNING	'LEVEL' 'NAME' has no Registers, ignoring 'LEVEL'.
M329	ERROR	CPU Type is not set, using default (Cortex-M3)
M330	ERROR	Interrupt 'NAME' Number not set.
M331	ERROR	Interrupt 'NAME' Number 'NUM' greater 239.
M332	WARNING	'LEVEL' 'NAME' has only one Register.
M333	ERROR	Duplicate <enumeratedValue> 'NUM': 'NAME' ('USAGE'), already used by 'NAME2' ('USAGE2') 'LINE'
M334	WARNING	'LEVEL' <'ITEM'> 'NAME' is very long, use <description> and a shorter <name>
M335	ERROR	Value 'NAME':'NUM' does not fit into field 'NAME2' 'BITRANGE'.
M336	ERROR	'LEVEL' 'NAME' already defined 'LINE'
M337	ERROR	'LEVEL' 'NAME' already defined 'LINE'
M338	ERROR	Field 'NAME' 'BITRANGE' ('ACCESS') overlaps 'NAME2' 'BITRANGE2' ('ACCESS2') 'LINE'
M339	ERROR	Register 'NAME' ('ACCESS') (@'ADDRSIZE') has same address or overlaps 'NAME2' ('ACCESS2') (@'ADDRSIZE2') 'LINE'
M340	ERROR	No Devices found.
M341	ERROR	More than one devices found, only one is allowed per SVD File.
M342	ERROR	Dim-extended 'LEVEL' 'NAME' must not have <headerStructName>
M343	ERROR	'LEVEL' 'NAME' (@'ADDR') has same address as 'NAME2' 'LINE'
M344	ERROR	Register 'NAME' (@'ADDRSIZE') is outside or does not fit any <addressBlock> specified for Peripheral 'NAME2' 'TEXT'
M345	ERROR	Field 'NAME' 'BITRANGE' does not fit into Register 'NAME2':'NUM'
M346	WARNING	Register 'NAME' (@'ADDR') offset is equal or is greater than it's Peripheral base address 'NAME2' (@'ADDR2'), is this intended?
M347	WARNING	Field 'NAME' (width < 6Bit) without any <enumeratedValue> found.
M348	ERROR	Alternate 'LEVEL' 'NAME' does not exist at 'LEVEL' address (@'ADDR')
M349	ERROR	Alternate 'LEVEL' 'NAME' is equal to 'LEVEL' name 'NAME2'
M350	WARNING	Peripheral 'NAME' (@'ADDR') is not 4Byte-aligned.
M351	WARNING	Peripheral 'TYPE' 'NAME' is equal to Peripheral name.
M352	WARNING	AddressBlock of Peripheral 'NAME' (@'ADDR') 'TEXT' overlaps 'NAME2' (@'ADDR2') 'TEXT2' 'LINE'
M353	WARNING	Peripheral group name 'NAME' should not end with '_'
M354	ERROR	Interrupt ''NUM':'NAME' specifies a Core Interrupt. Core Interrupts must not be defined, they are set through <cpu><name>.
M355	ERROR	No Interrupts found on pos. 0..15. External (Vendor-)Interrupts possibly defined on position 16+. External Interrupts must start on position 0
M356	WARNING	No Interrupt definitions found.
M357	ERROR	Core Interrupts found. Interrupt Numbers are wrong. Internal Interrupts must not be described, External Interrupts must start at 0.
M358	ERROR	AddressBlock of Peripheral 'NAME' 'TEXT' overlaps AddressBlock 'TEXT2' in same peripheral 'LINE'
M359	ERROR	Address Block: <usage> not set.
M360	ERROR	Address Block: found <'TAG'> ('HEXNUM') > 'HEXNUM2'.
M361	ERROR	'LEVEL' 'ITEM' 'NAME': 'RESERVED' items must not be defined.
M362	WARNING	'LEVEL' 'ITEM' 'NAME': 'RESERVED' items must not be defined.
M363	ERROR	CPU: <sauNumRegions> not set.
M364	ERROR	CPU: <sauNumRegions> value 'NUM' greater than SAU max num ('NUM2')
M365	WARNING	Register 'NAME' ('ACCESS') (@'ADDRSIZE') has same address or overlaps 'NAME2' ('ACCESS2') (@'ADDRSIZE2') 'LINE'
M366	ERROR	Register 'NAME' size ('NUM'Bit) is greater than <dimIncrement> * <addressBitsUnits> ('NUM2'Bit).
M367	WARNING	Access Type: Field 'NAME' ('ACCESS') does not match Register 'NAME2' ('ACCESS2')
M368	WARNING	'LEVEL' 'NAME' (@'ADDR') has same address as 'NAME2' 'LINE'
M369	ERROR	Enumerated Value 'NAME': <value> not set.
M370	ERROR	'LEVEL' 'NAME': <offset> not set.
M371	ERROR	'LEVEL' 'NAME' <headerStructName> is equal to hirachical name
M372	ERROR	'LEVEL' <'TAG'> 'NAME' already defined 'LINE'
M373	ERROR	'LEVEL' <'TAG'> 'NAME' already defined 'LINE'
M374	WARNING	<enumeratedValues> can be one <enumeratedValues> container for all <enumeratedValue>s, where <usage> can be read, write, or read-write or two <enumeratedValues> containers, where one is set to <usage> read and the other is set to <usage> write
M375	ERROR	'LEVEL' 'NAME' (<enumeratedValues> 'NAME2'): Too many <enumeratedValues> container specified.
M376	ERROR	'LEVEL' 'NAME' (<enumeratedValues> 'NAME2'): 'USAGE' container already defined in 'LINE'.
M377	ERROR	'LEVEL' 'NAME' (<enumeratedValues> 'NAME2'): 'USAGE' container conflicts with 'NAME3' 'LINE'.
M378	ERROR	Register Array: Register 'NAME' size ('NUM'Bit) does not match <dimIncrement> ('NUM2'Bit).
M379	ERROR	XBin Number 'NAME' too large, skipping evaluation.
M380	ERROR	AddressBlock of Peripheral 'NAME' (@'ADDR') 'TEXT' does not fit into 32Bit Address Space.
M381	ERROR	Interrupt 'NAME' Number 'NUM' greater or equal deviceNumInterrupts ('NUM2').
M382	ERROR	'LEVEL' 'NAME': 'NAME2' 'HEXNUM' does not fit into 'LEVEL' width: 'NUM' Bit.

Data modification errors

Message Number	Type	Message Text	Action
M517	WARNING	SFD Code generation: Forbidden Trigraph '??CHAR' found in 'NAME'.
M516	WARNING	SFD Code generation: Unsupported character found in 'NAME' : 'HEX'.
M518	WARNING	SFD Code generation: Unsupported ESC sequence found in 'NAME' : 'CHAR'.