CMSIS-Core (Cortex-M)  Version 5.7.0
CMSIS-Core support for Cortex-M processor-based devices
 All Data Structures Files Functions Variables Enumerations Enumerator Groups Pages
MPU Functions for Armv6-M/v7-M

Functions that relate to the Memory Protection Unit. More...

Content

 Define values
 Define values for MPU region setup.
 

Data Structures

struct  MPU_Type
 Structure type to access the Memory Protection Unit (MPU). More...
 
struct  ARM_MPU_Region_t
 Setup information of a single MPU Region. More...
 

Macros

#define ARM_MPU_RBAR(Region, BaseAddress)
 MPU Region Base Address Register Value. More...
 
#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size)
 MPU Region Attribute and Size Register Value. More...
 
#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size)
 MPU Region Attribute and Size Register Value. More...
 

Functions

__STATIC_INLINE void ARM_MPU_Enable (uint32_t MPU_CTRL)
 Enable the memory protection unit (MPU) and. More...
 
__STATIC_INLINE void ARM_MPU_Disable ()
 
__STATIC_INLINE void ARM_MPU_ClrRegion (uint32_t rnr)
 
__STATIC_INLINE void ARM_MPU_SetRegion (uint32_t rbar, uint32_t rasr)
 
__STATIC_INLINE void ARM_MPU_SetRegionEx (uint32_t rnr, uint32_t rbar, uint32_t rasr)
 
__STATIC_INLINE void ARM_MPU_OrderedMemcpy (volatile uint32_t *dst, const uint32_t *__RESTRICT src, uint32_t len)
 
__STATIC_INLINE void ARM_MPU_Load (MPU_Region_t const *table, uint32_t cnt)
 

Description

Functions that relate to the Memory Protection Unit.

The following functions support the optional Memory Protection Unit (MPU) that is available on the Cortex-M0+, M3, M4 and M7 processor.

The MPU is used to prevent from illegal memory accesses that are typically caused by errors in an application software.

Example:

int main()
{
// Set Region 0
ARM_MPU_SetRegionEx(0UL, 0x08000000UL, ARM_MPU_RASR(0UL, ARM_MPU_AP_FULL, 0UL, 0UL, 1UL, 1UL, 0x00UL, ARM_MPU_REGION_SIZE_1MB));
// Execute application code that is access protected by the MPU
}

Macro Definition Documentation

#define ARM_MPU_RASR (   DisableExec,
  AccessPermission,
  TypeExtField,
  IsShareable,
  IsCacheable,
  IsBufferable,
  SubRegionDisable,
  Size 
)

MPU Region Attribute and Size Register Value.

This macro is used to construct a valid RASR value. The ENABLE bit of the RASR value is implicitly set to 1.

Parameters
DisableExecInstruction access disable bit. 1 = disable instruction fetches.
AccessPermissionData access permission configures read/write access for User and Privileged mode. Possible values see ARM_MPU_AP_xxx.
TypeExtFieldType extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
IsShareable1 = region is shareable between multiple bus masters.
IsCacheable1 = region is cacheable (values may be kept in cache).
IsBufferable1 = region is bufferable (when using write-back caching). Cacheable but non-bufferable regions use write-through policy.
SubRegionDisableSub-region disable field (8 bits).
SizeRegion size with values defined under ARM_MPU_REGION_SIZE_xxx.
#define ARM_MPU_RASR_EX (   DisableExec,
  AccessPermission,
  AccessAttributes,
  SubRegionDisable,
  Size 
)

MPU Region Attribute and Size Register Value.

This macro is used to construct a valid RASR value. The ENABLE bit of the RASR value is implicitly set to 1.

Parameters
DisableExecInstruction access disable bit, 1= disable instruction fetches.
AccessPermissionData access permission configures read/write access for User and Privileged mode. Possible values see ARM_MPU_AP_xxx.
AccessAttributesMemory access attribution, see ARM_MPU_ACCESS_xxx.
SubRegionDisableSub-region disable field (8 bits).
SizeRegion size with values defined under ARM_MPU_REGION_SIZE_xxx.
#define ARM_MPU_RBAR (   Region,
  BaseAddress 
)

MPU Region Base Address Register Value.

This preprocessor function can be used to construct a valid RBAR value. The VALID bit is implicitly set to 1.

Parameters
RegionThe region to be configured, number 0 to 15.
BaseAddressThe base address for the region.

Function Documentation

__STATIC_INLINE void ARM_MPU_ClrRegion ( uint32_t  rnr)

Clear and disable the given MPU region.

Parameters
rnrRegion number to be cleared.
__STATIC_INLINE void ARM_MPU_Disable ( )

Disable the MPU.

__STATIC_INLINE void ARM_MPU_Enable ( uint32_t  MPU_CTRL)

Enable the memory protection unit (MPU) and.

Parameters
MPU_CTRLAdditional control settings that configure MPU behaviour

The function ARM_MPU_Enable writes to the register MPU->CTRL and sets bit ENABLE. The parameter MPU_CTRL provides additional bit values (see table below) that configure the MPU behaviour. For processors that implement an MPU Fault Handler the MemoryManagement_IRQn exception is enabled by setting the bit MEMFAULTACT in register SBC->SHCSR.

The following table contains possible values for the parameter MPU_CTRL that set specific bits in register MPU->CTRL.

Bit MPU_CTRL value When applied When not applied
1 MPU_CTRL_HFNMIENA_Msk Enable MPU during hard fault, NMI, and FAULTMASK handlers execution Disable MPU during hard fault, NMI, and FAULTMASK handler execution
2 MPU_CTRL_PRIVDEFENA_Msk Enable default memory map as a background region for privileged access Use only MPU region settings

Example:

// enable MPU with all region definitions. Exceptions are not protected by MPU.
MPU_Enable (0);
// enable MPU with all region definitions and background regions for privileged access. Exceptions are protected by MPU.
MPU_Enable (MPU_CTRL_PRIVDEFENA_Msk | MPU_CTRL_HFNMIENA_Msk);
__STATIC_INLINE void ARM_MPU_Load ( MPU_Region_t const *  table,
uint32_t  cnt 
)

Load the given number of MPU regions from a table.

Parameters
tablePointer to the MPU configuration table.
cntNumber of regions to be configured.
Note
only up to 16 regions can be handled as the function ARM_MPU_Load uses the REGION field in MPU->RBAR.

Example:

const ARM_MPU_Region_t mpuTable[3][4] = {
{
{ .RBAR = ARM_MPU_RBAR(0UL, 0x08000000UL), .RASR = ARM_MPU_RASR(0UL, ARM_MPU_AP_FULL, 0UL, 0UL, 1UL, 1UL, 0x00UL, ARM_MPU_REGION_SIZE_1MB) },
{ .RBAR = ARM_MPU_RBAR(1UL, 0x20000000UL), .RASR = ARM_MPU_RASR(1UL, ARM_MPU_AP_FULL, 0UL, 0UL, 1UL, 1UL, 0x00UL, ARM_MPU_REGION_SIZE_32KB) },
{ .RBAR = ARM_MPU_RBAR(2UL, 0x40020000UL), .RASR = ARM_MPU_RASR(1UL, ARM_MPU_AP_FULL, 2UL, 0UL, 0UL, 0UL, 0x00UL, ARM_MPU_REGION_SIZE_8KB) },
{ .RBAR = ARM_MPU_RBAR(3UL, 0x40022000UL), .RASR = ARM_MPU_RASR(1UL, ARM_MPU_AP_FULL, 2UL, 0UL, 0UL, 0UL, 0xC0UL, ARM_MPU_REGION_SIZE_4KB) }
},
{
{ .RBAR = ARM_MPU_RBAR(4UL, 0x08000000UL), .RASR = ARM_MPU_RASR(0UL, ARM_MPU_AP_FULL, 0UL, 0UL, 1UL, 1UL, 0x00UL, ARM_MPU_REGION_SIZE_1MB) },
{ .RBAR = ARM_MPU_RBAR(5UL, 0x20000000UL), .RASR = ARM_MPU_RASR(1UL, ARM_MPU_AP_FULL, 0UL, 0UL, 1UL, 1UL, 0x00UL, ARM_MPU_REGION_SIZE_32KB) },
{ .RBAR = ARM_MPU_RBAR(6UL, 0x40020000UL), .RASR = ARM_MPU_RASR(1UL, ARM_MPU_AP_FULL, 2UL, 0UL, 0UL, 0UL, 0x00UL, ARM_MPU_REGION_SIZE_8KB) },
{ .RBAR = ARM_MPU_RBAR(7UL, 0x40022000UL), .RASR = ARM_MPU_RASR(1UL, ARM_MPU_AP_FULL, 2UL, 0UL, 0UL, 0UL, 0xC0UL, ARM_MPU_REGION_SIZE_4KB) }
},
{
{ .RBAR = ARM_MPU_RBAR(4UL, 0x18000000UL), .RASR = ARM_MPU_RASR(0UL, ARM_MPU_AP_FULL, 0UL, 0UL, 1UL, 1UL, 0x00UL, ARM_MPU_REGION_SIZE_1MB) },
{ .RBAR = ARM_MPU_RBAR(5UL, 0x30000000UL), .RASR = ARM_MPU_RASR(1UL, ARM_MPU_AP_FULL, 0UL, 0UL, 1UL, 1UL, 0x00UL, ARM_MPU_REGION_SIZE_32KB) },
{ .RBAR = ARM_MPU_RBAR(6UL, 0x50020000UL), .RASR = ARM_MPU_RASR(1UL, ARM_MPU_AP_FULL, 2UL, 0UL, 0UL, 0UL, 0x00UL, ARM_MPU_REGION_SIZE_8KB) },
{ .RBAR = ARM_MPU_RBAR(7UL, 0x50022000UL), .RASR = ARM_MPU_RASR(1UL, ARM_MPU_AP_FULL, 2UL, 0UL, 0UL, 0UL, 0xC0UL, ARM_MPU_REGION_SIZE_4KB) }
}
};
void UpdateMpu(uint32_t idx)
{
ARM_MPU_Load(mpuTable[idx], 4);
}
__STATIC_INLINE void ARM_MPU_OrderedMemcpy ( volatile uint32_t *  dst,
const uint32_t *__RESTRICT  src,
uint32_t  len 
)

Memcpy with strictly ordered memory access, e.g. used by code in ARM_MPU_Load.

Parameters
dstDestination data is copied to.
srcSource data is copied from.
lenAmount of data words to be copied.
__STATIC_INLINE void ARM_MPU_SetRegion ( uint32_t  rbar,
uint32_t  rasr 
)

Configure an MPU region.

The region number should be contained in the rbar value.

Parameters
rbarValue for RBAR register.
rasrValue for RASR register.
__STATIC_INLINE void ARM_MPU_SetRegionEx ( uint32_t  rnr,
uint32_t  rbar,
uint32_t  rasr 
)

Configure the given MPU region.

Parameters
rnrRegion number to be configured.
rbarValue for RBAR register.
rasrValue for RASR register.