CMSIS-Core (Cortex-M)  Version 5.7.0
CMSIS-Core support for Cortex-M processor-based devices
 All Data Structures Files Functions Variables Enumerations Enumerator Groups Pages
PMU Functions for Armv8.1-M

Functions that relate to the Performance Monitoring Unit. More...

Content

 PMU Events for Armv8.1-M
 IDs for Armv8.1-M architecture defined events.
 
 PMU Events for Cortex-M55
 IDs for additional events defined for Cortex-M55.
 
 PMU Events for Cortex-M85
 IDs for additional events defined for Cortex-M85.
 

Data Structures

struct  PMU_Type
 Structure type to access the Performance Monitoring Unit (PMU). More...
 

Macros

#define PMU
 PMU configuration struct. More...
 

Functions

__STATIC_INLINE void ARM_PMU_Enable (void)
 Enable the PMU. More...
 
__STATIC_INLINE void ARM_PMU_Disable (void)
 Disable the PMU. More...
 
__STATIC_INLINE void ARM_PMU_Set_EVTYPER (uint32_t num, uint32_t type)
 Set event to count for PMU event counter. More...
 
__STATIC_INLINE void ARM_PMU_CYCCNT_Reset (void)
 Reset cycle counter. More...
 
__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset (void)
 Reset all event counters. More...
 
__STATIC_INLINE void ARM_PMU_CNTR_Enable (uint32_t mask)
 Enable counters. More...
 
__STATIC_INLINE void ARM_PMU_CNTR_Disable (uint32_t mask)
 Disable counters. More...
 
__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR (void)
 Read cycle counter. More...
 
__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR (uint32_t num)
 Read event counter. More...
 
__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS (void)
 Read counter overflow status. More...
 
__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS (uint32_t mask)
 Clear counter overflow status. More...
 
__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable (uint32_t mask)
 Enable counter overflow interrupt request. More...
 
__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable (uint32_t mask)
 Disable counter overflow interrupt request. More...
 
__STATIC_INLINE void ARM_PMU_CNTR_Increment (uint32_t mask)
 Software increment event counter. More...
 

Description

Functions that relate to the Performance Monitoring Unit.

The following functions support the Performance Monitoring Unit (PMU) that is available on the Cortex-M55/M85 processors.

The PMU is used to monitor events that occur during run-time of an application.

Example:

// Initialize counter variables
unsigned int cycle_count = 0;
unsigned int l1_dcache_miss_count = 0;
unsigned int instructions_retired_count = 0;
// Enable the PMU
// Note: Before using the PMU, software needs to ensure
// that trace is enabled via the Debug Exception Monitor Control Register, DEMCR:
// CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
// Configure Event Counter Register 0 to count instructions retired
// Configure Event Counter Register 1 to count L1 D-Cache misses
// Reset Event Counters and Cycle Counter
// Start incrementing Cycle Count Register and Event Counter Registers 0 & 1
ARM_PMU_CNTR_Enable(PMU_CNTENSET_CCNTR_ENABLE_Msk|PMU_CNTENSET_CNT0_ENABLE_Msk|PMU_CNTENSET_CNT1_ENABLE_Msk);
// Code you want to measure here
// Stop incrementing Cycle Count Register and Event Counter Registers 0 & 1
ARM_PMU_CNTR_Disable(PMU_CNTENCLR_CCNTR_ENABLE_Msk|PMU_CNTENCLR_CNT0_ENABLE_Msk|PMU_CNTENCLR_CNT1_ENABLE_Msk);
// Get cycle count, number of instructions retired and number of L1 D-Cache misses (on read)
cycle_count = cycle_count + ARM_PMU_Get_CCNTR();
instructions_retired_count = instructions_retired_count + ARM_PMU_Get_EVCNTR(0);
l1_dcache_miss_count = l1_dcache_miss_count + ARM_PMU_Get_EVCNTR(1); // Note: D-Cache must be enabled using
// SCB_EnableDCache() for meaningful result.

Macro Definition Documentation

#define PMU

PMU configuration struct.

This macro can be used to access the PMU registers, directly. For the common tasks one should prefer using the control functions.

Example: Example:

PMU->CTRL |= PMU_CTRL_ENABLE_Msk; // Enable PMU

Function Documentation

__STATIC_INLINE void ARM_PMU_CNTR_Disable ( uint32_t  mask)

Disable counters.

Parameters
[in]maskCounters to enable
Note
Disables one or more of the following:
  • event counters (0-30)
  • cycle counter
__STATIC_INLINE void ARM_PMU_CNTR_Enable ( uint32_t  mask)

Enable counters.

Parameters
[in]maskCounters to enable
Note
Enables one or more of the following:
  • event counters (0-30)
  • cycle counter
__STATIC_INLINE void ARM_PMU_CNTR_Increment ( uint32_t  mask)

Software increment event counter.

Parameters
[in]maskCounters to increment
Note
Software increment bits for one or more event counters (0-30)
__STATIC_INLINE void ARM_PMU_CYCCNT_Reset ( void  )

Reset cycle counter.

__STATIC_INLINE void ARM_PMU_Disable ( void  )

Disable the PMU.

__STATIC_INLINE void ARM_PMU_Enable ( void  )

Enable the PMU.

__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset ( void  )

Reset all event counters.

__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR ( void  )

Read cycle counter.

Returns
Cycle count
__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS ( void  )

Read counter overflow status.

Returns
Counter overflow status bits for the following:
  • event counters (0-30)
  • cycle counter
__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR ( uint32_t  num)

Read event counter.

Parameters
[in]numEvent counter (0-30) to read
Returns
Event count
__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable ( uint32_t  mask)

Disable counter overflow interrupt request.

Parameters
[in]maskCounter overflow interrupt request bits to clear
Note
Clears overflow interrupt request bits for one or more of the following:
  • event counters (0-30)
  • cycle counter
__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable ( uint32_t  mask)

Enable counter overflow interrupt request.

Parameters
[in]maskCounter overflow interrupt request bits to set
Note
Sets overflow interrupt request bits for one or more of the following:
  • event counters (0-30)
  • cycle counter
__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS ( uint32_t  mask)

Clear counter overflow status.

Parameters
[in]maskCounter overflow status bits to clear
Note
Clears overflow status bits for one or more of the following:
  • event counters (0-30)
  • cycle counter
__STATIC_INLINE void ARM_PMU_Set_EVTYPER ( uint32_t  num,
uint32_t  type 
)

Set event to count for PMU event counter.

Parameters
[in]numEvent counter (0-30) to configure
[in]typeEvent to count