CMSIS-DAP  Version 2.1.2
Interface Firmware for CoreSight Debug Access Port
 All Functions Groups Pages
DAP_SWO_Baudrate

Set SWO baudrate. More...

Set SWO baudrate.

DAP_SWO_Baudrate (0x19):

Sets the baudrate for capturing SWO trace data. Can be called iteratively to determine supported baudrates.

DAP_SWO_Baudrate Request:

| BYTE | WORD |
> 0x19 | Baudrate |
|******|**********|

DAP_SWO_Baudrate Response:

| BYTE | WORD |
< 0x19 | Baudrate |
|******|**********|
Note
When Manchester Mode is used and if decoder is implemented with clock recovery then baudrate is not required since clock is automatically decoded. However such decoders are harder to implement (especially for high frequencies) and the clock recovery might not be implemented. Therefore the baudrate should be provided also for Manchester mode.