CMSIS-Driver  Version 2.8.0
Peripheral Interface for Middleware and Application Code
 All Data Structures Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
SAI Controls

Specifies controls. More...

Macros

#define ARM_SAI_CONFIGURE_TX   (0x01UL)
 Configure Transmitter; arg1 and arg2 provide additional configuration. More...
 
#define ARM_SAI_CONFIGURE_RX   (0x02UL)
 Configure Receiver; arg1 and arg2 provide additional configuration. More...
 
#define ARM_SAI_CONTROL_TX   (0x03UL)
 Control Transmitter; arg1.0: 0=disable (default), 1=enable; arg1.1: mute. More...
 
#define ARM_SAI_CONTROL_RX   (0x04UL)
 Control Receiver; arg1.0: 0=disable (default), 1=enable. More...
 
#define ARM_SAI_MASK_SLOTS_TX   (0x05UL)
 Mask Transmitter slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default. More...
 
#define ARM_SAI_MASK_SLOTS_RX   (0x06UL)
 Mask Receiver slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default. More...
 
#define ARM_SAI_ABORT_SEND   (0x07UL)
 Abort ARM_SAI_Send. More...
 
#define ARM_SAI_ABORT_RECEIVE   (0x08UL)
 Abort ARM_SAI_Receive. More...
 

Description

Specifies controls.

Macro Definition Documentation

#define ARM_SAI_CONFIGURE_TX   (0x01UL)

Configure Transmitter; arg1 and arg2 provide additional configuration.

See Also
ARM_SAI_Control
#define ARM_SAI_CONFIGURE_RX   (0x02UL)

Configure Receiver; arg1 and arg2 provide additional configuration.

See Also
ARM_SAI_Control
#define ARM_SAI_CONTROL_TX   (0x03UL)

Control Transmitter; arg1.0: 0=disable (default), 1=enable; arg1.1: mute.

See Also
ARM_SAI_Control; ARM_SAI_Send
#define ARM_SAI_CONTROL_RX   (0x04UL)

Control Receiver; arg1.0: 0=disable (default), 1=enable.

See Also
ARM_SAI_Control; ARM_SAI_Receive
#define ARM_SAI_MASK_SLOTS_TX   (0x05UL)

Mask Transmitter slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default.

See Also
ARM_SAI_Control; ARM_SAI_Send
#define ARM_SAI_MASK_SLOTS_RX   (0x06UL)

Mask Receiver slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default.

See Also
ARM_SAI_Control; ARM_SAI_Receive
#define ARM_SAI_ABORT_SEND   (0x07UL)
#define ARM_SAI_ABORT_RECEIVE   (0x08UL)