SAI Controls

Specifies controls. More...

Macros
#define	ARM_SAI_CONFIGURE_TX   (0x01UL)
	Configure Transmitter; arg1 and arg2 provide additional configuration. More...
#define	ARM_SAI_CONFIGURE_RX   (0x02UL)
	Configure Receiver; arg1 and arg2 provide additional configuration. More...
#define	ARM_SAI_CONTROL_TX   (0x03UL)
	Control Transmitter; arg1.0: 0=disable (default), 1=enable; arg1.1: mute. More...
#define	ARM_SAI_CONTROL_RX   (0x04UL)
	Control Receiver; arg1.0: 0=disable (default), 1=enable. More...
#define	ARM_SAI_MASK_SLOTS_TX   (0x05UL)
	Mask Transmitter slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default. More...
#define	ARM_SAI_MASK_SLOTS_RX   (0x06UL)
	Mask Receiver slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default. More...
#define	ARM_SAI_ABORT_SEND   (0x07UL)
	Abort ARM_SAI_Send. More...
#define	ARM_SAI_ABORT_RECEIVE   (0x08UL)
	Abort ARM_SAI_Receive. More...

Description

Specifies controls.

Macro Definition Documentation

#define ARM_SAI_CONFIGURE_TX   (0x01UL)

Configure Transmitter; arg1 and arg2 provide additional configuration.

See Also

ARM_SAI_Control

#define ARM_SAI_CONFIGURE_RX   (0x02UL)

Configure Receiver; arg1 and arg2 provide additional configuration.

See Also

ARM_SAI_Control

#define ARM_SAI_CONTROL_TX   (0x03UL)

Control Transmitter; arg1.0: 0=disable (default), 1=enable; arg1.1: mute.

See Also

ARM_SAI_Control; ARM_SAI_Send

#define ARM_SAI_CONTROL_RX   (0x04UL)

Control Receiver; arg1.0: 0=disable (default), 1=enable.

See Also

ARM_SAI_Control; ARM_SAI_Receive

#define ARM_SAI_MASK_SLOTS_TX   (0x05UL)

Mask Transmitter slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default.

See Also

ARM_SAI_Control; ARM_SAI_Send

#define ARM_SAI_MASK_SLOTS_RX   (0x06UL)

Mask Receiver slots; arg1 = mask (bit: 0=active, 1=inactive); all configured slots are active by default.

See Also

ARM_SAI_Control; ARM_SAI_Receive

#define ARM_SAI_ABORT_SEND   (0x07UL)

Abort ARM_SAI_Send.

See Also

ARM_SAI_Control; ARM_SAI_Send

#define ARM_SAI_ABORT_RECEIVE   (0x08UL)

Abort ARM_SAI_Receive.

See Also

ARM_SAI_Control; ARM_SAI_Receive