CMSIS-Driver
Version 2.8.0
Peripheral Interface for Middleware and Application Code
|
Specifies additional miscellaneous controls. More...
Macros | |
#define | ARM_USART_SET_DEFAULT_TX_VALUE (0x10UL << ARM_USART_CONTROL_Pos) |
Set default Transmit value (Synchronous Receive only); arg = value. More... | |
#define | ARM_USART_SET_IRDA_PULSE (0x11UL << ARM_USART_CONTROL_Pos) |
Set IrDA Pulse in ns; arg: 0=3/16 of bit period. More... | |
#define | ARM_USART_SET_SMART_CARD_GUARD_TIME (0x12UL << ARM_USART_CONTROL_Pos) |
Set Smart Card Guard Time; arg = number of bit periods. More... | |
#define | ARM_USART_SET_SMART_CARD_CLOCK (0x13UL << ARM_USART_CONTROL_Pos) |
Set Smart Card Clock in Hz; arg: 0=Clock not generated. More... | |
#define | ARM_USART_CONTROL_SMART_CARD_NACK (0x14UL << ARM_USART_CONTROL_Pos) |
Smart Card NACK generation; arg: 0=disabled, 1=enabled. More... | |
#define | ARM_USART_CONTROL_TX (0x15UL << ARM_USART_CONTROL_Pos) |
Transmitter; arg: 0=disabled, 1=enabled. More... | |
#define | ARM_USART_CONTROL_RX (0x16UL << ARM_USART_CONTROL_Pos) |
Receiver; arg: 0=disabled, 1=enabled. More... | |
#define | ARM_USART_CONTROL_BREAK (0x17UL << ARM_USART_CONTROL_Pos) |
Continuous Break transmission; arg: 0=disabled, 1=enabled. More... | |
#define | ARM_USART_ABORT_SEND (0x18UL << ARM_USART_CONTROL_Pos) |
Abort ARM_USART_Send. More... | |
#define | ARM_USART_ABORT_RECEIVE (0x19UL << ARM_USART_CONTROL_Pos) |
Abort ARM_USART_Receive. More... | |
#define | ARM_USART_ABORT_TRANSFER (0x1AUL << ARM_USART_CONTROL_Pos) |
Abort ARM_USART_Transfer. More... | |
Specifies additional miscellaneous controls.
#define ARM_USART_SET_DEFAULT_TX_VALUE (0x10UL << ARM_USART_CONTROL_Pos) |
Set default Transmit value (Synchronous Receive only); arg = value.
#define ARM_USART_SET_IRDA_PULSE (0x11UL << ARM_USART_CONTROL_Pos) |
Set IrDA Pulse in ns; arg: 0=3/16 of bit period.
#define ARM_USART_SET_SMART_CARD_GUARD_TIME (0x12UL << ARM_USART_CONTROL_Pos) |
Set Smart Card Guard Time; arg = number of bit periods.
#define ARM_USART_SET_SMART_CARD_CLOCK (0x13UL << ARM_USART_CONTROL_Pos) |
Set Smart Card Clock in Hz; arg: 0=Clock not generated.
#define ARM_USART_CONTROL_SMART_CARD_NACK (0x14UL << ARM_USART_CONTROL_Pos) |
Smart Card NACK generation; arg: 0=disabled, 1=enabled.
#define ARM_USART_CONTROL_TX (0x15UL << ARM_USART_CONTROL_Pos) |
Transmitter; arg: 0=disabled, 1=enabled.
#define ARM_USART_CONTROL_RX (0x16UL << ARM_USART_CONTROL_Pos) |
Receiver; arg: 0=disabled, 1=enabled.
#define ARM_USART_CONTROL_BREAK (0x17UL << ARM_USART_CONTROL_Pos) |
Continuous Break transmission; arg: 0=disabled, 1=enabled.
#define ARM_USART_ABORT_SEND (0x18UL << ARM_USART_CONTROL_Pos) |
Abort ARM_USART_Send.
#define ARM_USART_ABORT_RECEIVE (0x19UL << ARM_USART_CONTROL_Pos) |
Abort ARM_USART_Receive.
#define ARM_USART_ABORT_TRANSFER (0x1AUL << ARM_USART_CONTROL_Pos) |
Abort ARM_USART_Transfer.