 |
CMSIS-Driver
Version 2.8.0
Peripheral Interface for Middleware and Application Code
|
|
CMSIS-Driver
Version 2.8.0
Peripheral Interface for Middleware and Application Code
|
Data Structures | |
| struct | ARM_NAND_ECC_INFO |
| NAND ECC (Error Correction Code) Information. More... | |
| struct | ARM_NAND_STATUS |
| NAND Status. More... | |
| struct | ARM_NAND_CAPABILITIES |
| NAND Driver Capabilities. More... | |
| struct | ARM_DRIVER_NAND |
| Access structure of the NAND Driver. More... | |
Macros | |
| #define | ARM_NAND_API_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2,4) /* API version */ |
| #define | _ARM_Driver_NAND_(n) Driver_NAND##n |
| #define | ARM_Driver_NAND_(n) _ARM_Driver_NAND_(n) |
| #define | ARM_NAND_POWER_VCC_Pos 0 |
| #define | ARM_NAND_POWER_VCC_Msk (0x07UL << ARM_NAND_POWER_VCC_Pos) |
| #define | ARM_NAND_POWER_VCC_OFF (0x01UL << ARM_NAND_POWER_VCC_Pos) |
| VCC Power off. More... | |
| #define | ARM_NAND_POWER_VCC_3V3 (0x02UL << ARM_NAND_POWER_VCC_Pos) |
| VCC = 3.3V. More... | |
| #define | ARM_NAND_POWER_VCC_1V8 (0x03UL << ARM_NAND_POWER_VCC_Pos) |
| VCC = 1.8V. More... | |
| #define | ARM_NAND_POWER_VCCQ_Pos 3 |
| #define | ARM_NAND_POWER_VCCQ_Msk (0x07UL << ARM_NAND_POWER_VCCQ_Pos) |
| #define | ARM_NAND_POWER_VCCQ_OFF (0x01UL << ARM_NAND_POWER_VCCQ_Pos) |
| VCCQ I/O Power off. More... | |
| #define | ARM_NAND_POWER_VCCQ_3V3 (0x02UL << ARM_NAND_POWER_VCCQ_Pos) |
| VCCQ = 3.3V. More... | |
| #define | ARM_NAND_POWER_VCCQ_1V8 (0x03UL << ARM_NAND_POWER_VCCQ_Pos) |
| VCCQ = 1.8V. More... | |
| #define | ARM_NAND_POWER_VPP_OFF (1UL << 6) |
| VPP off. More... | |
| #define | ARM_NAND_POWER_VPP_ON (1UL << 7) |
| VPP on. More... | |
| #define | ARM_NAND_BUS_MODE (0x01UL) |
| Set Bus Mode as specified with arg. More... | |
| #define | ARM_NAND_BUS_DATA_WIDTH (0x02UL) |
| Set Bus Data Width as specified with arg. More... | |
| #define | ARM_NAND_DRIVER_STRENGTH (0x03UL) |
| Set Driver Strength as specified with arg. More... | |
| #define | ARM_NAND_DEVICE_READY_EVENT (0x04UL) |
| Generate ARM_NAND_EVENT_DEVICE_READY; arg: 0=disabled (default), 1=enabled. More... | |
| #define | ARM_NAND_DRIVER_READY_EVENT (0x05UL) |
| Generate ARM_NAND_EVENT_DRIVER_READY; arg: 0=disabled (default), 1=enabled. More... | |
| #define | ARM_NAND_BUS_INTERFACE_Pos 4 |
| #define | ARM_NAND_BUS_INTERFACE_Msk (0x03UL << ARM_NAND_BUS_INTERFACE_Pos) |
| #define | ARM_NAND_BUS_SDR (0x00UL << ARM_NAND_BUS_INTERFACE_Pos) |
| Data Interface: SDR (Single Data Rate) - Traditional interface (default) More... | |
| #define | ARM_NAND_BUS_DDR (0x01UL << ARM_NAND_BUS_INTERFACE_Pos) |
| Data Interface: NV-DDR (Double Data Rate) More... | |
| #define | ARM_NAND_BUS_DDR2 (0x02UL << ARM_NAND_BUS_INTERFACE_Pos) |
| Data Interface: NV-DDR2 (Double Data Rate) More... | |
| #define | ARM_NAND_BUS_TIMING_MODE_Pos 0 |
| #define | ARM_NAND_BUS_TIMING_MODE_Msk (0x0FUL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| #define | ARM_NAND_BUS_TIMING_MODE_0 (0x00UL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| Timing Mode 0 (default) More... | |
| #define | ARM_NAND_BUS_TIMING_MODE_1 (0x01UL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| Timing Mode 1. More... | |
| #define | ARM_NAND_BUS_TIMING_MODE_2 (0x02UL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| Timing Mode 2. More... | |
| #define | ARM_NAND_BUS_TIMING_MODE_3 (0x03UL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| Timing Mode 3. More... | |
| #define | ARM_NAND_BUS_TIMING_MODE_4 (0x04UL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| Timing Mode 4 (SDR EDO capable) More... | |
| #define | ARM_NAND_BUS_TIMING_MODE_5 (0x05UL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| Timing Mode 5 (SDR EDO capable) More... | |
| #define | ARM_NAND_BUS_TIMING_MODE_6 (0x06UL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| Timing Mode 6 (NV-DDR2 only) More... | |
| #define | ARM_NAND_BUS_TIMING_MODE_7 (0x07UL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| Timing Mode 7 (NV-DDR2 only) More... | |
| #define | ARM_NAND_BUS_DDR2_DO_WCYC_Pos 8 |
| #define | ARM_NAND_BUS_DDR2_DO_WCYC_Msk (0x0FUL << ARM_NAND_BUS_DDR2_DO_WCYC_Pos) |
| #define | ARM_NAND_BUS_DDR2_DO_WCYC_0 (0x00UL << ARM_NAND_BUS_DDR2_DO_WCYC_Pos) |
| DDR2 Data Output Warm-up cycles: 0 (default) More... | |
| #define | ARM_NAND_BUS_DDR2_DO_WCYC_1 (0x01UL << ARM_NAND_BUS_DDR2_DO_WCYC_Pos) |
| DDR2 Data Output Warm-up cycles: 1. More... | |
| #define | ARM_NAND_BUS_DDR2_DO_WCYC_2 (0x02UL << ARM_NAND_BUS_DDR2_DO_WCYC_Pos) |
| DDR2 Data Output Warm-up cycles: 2. More... | |
| #define | ARM_NAND_BUS_DDR2_DO_WCYC_4 (0x03UL << ARM_NAND_BUS_DDR2_DO_WCYC_Pos) |
| DDR2 Data Output Warm-up cycles: 4. More... | |
| #define | ARM_NAND_BUS_DDR2_DI_WCYC_Pos 12 |
| #define | ARM_NAND_BUS_DDR2_DI_WCYC_Msk (0x0FUL << ARM_NAND_BUS_DDR2_DI_WCYC_Pos) |
| #define | ARM_NAND_BUS_DDR2_DI_WCYC_0 (0x00UL << ARM_NAND_BUS_DDR2_DI_WCYC_Pos) |
| DDR2 Data Input Warm-up cycles: 0 (default) More... | |
| #define | ARM_NAND_BUS_DDR2_DI_WCYC_1 (0x01UL << ARM_NAND_BUS_DDR2_DI_WCYC_Pos) |
| DDR2 Data Input Warm-up cycles: 1. More... | |
| #define | ARM_NAND_BUS_DDR2_DI_WCYC_2 (0x02UL << ARM_NAND_BUS_DDR2_DI_WCYC_Pos) |
| DDR2 Data Input Warm-up cycles: 2. More... | |
| #define | ARM_NAND_BUS_DDR2_DI_WCYC_4 (0x03UL << ARM_NAND_BUS_DDR2_DI_WCYC_Pos) |
| DDR2 Data Input Warm-up cycles: 4. More... | |
| #define | ARM_NAND_BUS_DDR2_VEN (1UL << 16) |
| DDR2 Enable external VREFQ as reference. More... | |
| #define | ARM_NAND_BUS_DDR2_CMPD (1UL << 17) |
| DDR2 Enable complementary DQS (DQS_c) signal. More... | |
| #define | ARM_NAND_BUS_DDR2_CMPR (1UL << 18) |
| DDR2 Enable complementary RE_n (RE_c) signal. More... | |
| #define | ARM_NAND_BUS_DATA_WIDTH_8 (0x00UL) |
| Bus Data Width: 8 bit (default) More... | |
| #define | ARM_NAND_BUS_DATA_WIDTH_16 (0x01UL) |
| Bus Data Width: 16 bit. More... | |
| #define | ARM_NAND_DRIVER_STRENGTH_18 (0x00UL) |
| Driver Strength 2.0x = 18 Ohms. More... | |
| #define | ARM_NAND_DRIVER_STRENGTH_25 (0x01UL) |
| Driver Strength 1.4x = 25 Ohms. More... | |
| #define | ARM_NAND_DRIVER_STRENGTH_35 (0x02UL) |
| Driver Strength 1.0x = 35 Ohms (default) More... | |
| #define | ARM_NAND_DRIVER_STRENGTH_50 (0x03UL) |
| Driver Strength 0.7x = 50 Ohms. More... | |
| #define | ARM_NAND_ECC_INDEX_Pos 0 |
| #define | ARM_NAND_ECC_INDEX_Msk (0xFFUL << ARM_NAND_ECC_INDEX_Pos) |
| #define | ARM_NAND_ECC(n) ((n) & ARM_NAND_ECC_INDEX_Msk) |
| Select ECC. More... | |
| #define | ARM_NAND_ECC0 (1UL << 8) |
| Use ECC0 of selected ECC. More... | |
| #define | ARM_NAND_ECC1 (1UL << 9) |
| Use ECC1 of selected ECC. More... | |
| #define | ARM_NAND_DRIVER_DONE_EVENT (1UL << 16) |
| Generate ARM_NAND_EVENT_DRIVER_DONE. More... | |
| #define | ARM_NAND_CODE_SEND_CMD1 (1UL << 17) |
| Send Command 1. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_COL1 (1UL << 18) |
| Send Column Address 1. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_COL2 (1UL << 19) |
| Send Column Address 2. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_ROW1 (1UL << 20) |
| Send Row Address 1. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_ROW2 (1UL << 21) |
| Send Row Address 2. More... | |
| #define | ARM_NAND_CODE_SEND_ADDR_ROW3 (1UL << 22) |
| Send Row Address 3. More... | |
| #define | ARM_NAND_CODE_INC_ADDR_ROW (1UL << 23) |
| Auto-increment Row Address. More... | |
| #define | ARM_NAND_CODE_WRITE_DATA (1UL << 24) |
| Write Data. More... | |
| #define | ARM_NAND_CODE_SEND_CMD2 (1UL << 25) |
| Send Command 2. More... | |
| #define | ARM_NAND_CODE_WAIT_BUSY (1UL << 26) |
| Wait while R/Bn busy. More... | |
| #define | ARM_NAND_CODE_READ_DATA (1UL << 27) |
| Read Data. More... | |
| #define | ARM_NAND_CODE_SEND_CMD3 (1UL << 28) |
| Send Command 3. More... | |
| #define | ARM_NAND_CODE_READ_STATUS (1UL << 29) |
| Read Status byte and check FAIL bit (bit 0) More... | |
| #define | ARM_NAND_CODE_CMD1_Pos 0 |
| #define | ARM_NAND_CODE_CMD1_Msk (0xFFUL << ARM_NAND_CODE_CMD1_Pos) |
| #define | ARM_NAND_CODE_CMD2_Pos 8 |
| #define | ARM_NAND_CODE_CMD2_Msk (0xFFUL << ARM_NAND_CODE_CMD2_Pos) |
| #define | ARM_NAND_CODE_CMD3_Pos 16 |
| #define | ARM_NAND_CODE_CMD3_Msk (0xFFUL << ARM_NAND_CODE_CMD3_Pos) |
| #define | ARM_NAND_CODE_ADDR_COL1_Pos 0 |
| #define | ARM_NAND_CODE_ADDR_COL1_Msk (0xFFUL << ARM_NAND_CODE_ADDR_COL1_Pos) |
| #define | ARM_NAND_CODE_ADDR_COL2_Pos 8 |
| #define | ARM_NAND_CODE_ADDR_COL2_Msk (0xFFUL << ARM_NAND_CODE_ADDR_COL2_Pos) |
| #define | ARM_NAND_CODE_ADDR_ROW1_Pos 0 |
| #define | ARM_NAND_CODE_ADDR_ROW1_Msk (0xFFUL << ARM_NAND_CODE_ADDR_ROW1_Pos) |
| #define | ARM_NAND_CODE_ADDR_ROW2_Pos 8 |
| #define | ARM_NAND_CODE_ADDR_ROW2_Msk (0xFFUL << ARM_NAND_CODE_ADDR_ROW2_Pos) |
| #define | ARM_NAND_CODE_ADDR_ROW3_Pos 16 |
| #define | ARM_NAND_CODE_ADDR_ROW3_Msk (0xFFUL << ARM_NAND_CODE_ADDR_ROW3_Pos) |
| #define | ARM_NAND_ERROR_ECC (ARM_DRIVER_ERROR_SPECIFIC - 1) |
| ECC generation/correction failed. More... | |
| #define | ARM_NAND_EVENT_DEVICE_READY (1UL << 0) |
| Device Ready: R/Bn rising edge. More... | |
| #define | ARM_NAND_EVENT_DRIVER_READY (1UL << 1) |
| Driver Ready. More... | |
| #define | ARM_NAND_EVENT_DRIVER_DONE (1UL << 2) |
| Driver operation done. More... | |
| #define | ARM_NAND_EVENT_ECC_ERROR (1UL << 3) |
| ECC could not correct data. More... | |
Typedefs | |
| typedef void(* | ARM_NAND_SignalEvent_t )(uint32_t dev_num, uint32_t event) |
| Pointer to ARM_NAND_SignalEvent : Signal NAND Event. More... | |
| #define ARM_NAND_API_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2,4) /* API version */ |
| #define _ARM_Driver_NAND_ | ( | n | ) | Driver_NAND##n |
| #define ARM_Driver_NAND_ | ( | n | ) | _ARM_Driver_NAND_(n) |
| #define ARM_NAND_POWER_VCC_Pos 0 |
| #define ARM_NAND_POWER_VCC_Msk (0x07UL << ARM_NAND_POWER_VCC_Pos) |
| #define ARM_NAND_POWER_VCC_OFF (0x01UL << ARM_NAND_POWER_VCC_Pos) |
VCC Power off.
| #define ARM_NAND_POWER_VCC_3V3 (0x02UL << ARM_NAND_POWER_VCC_Pos) |
VCC = 3.3V.
| #define ARM_NAND_POWER_VCC_1V8 (0x03UL << ARM_NAND_POWER_VCC_Pos) |
VCC = 1.8V.
| #define ARM_NAND_POWER_VCCQ_Pos 3 |
| #define ARM_NAND_POWER_VCCQ_Msk (0x07UL << ARM_NAND_POWER_VCCQ_Pos) |
| #define ARM_NAND_POWER_VCCQ_OFF (0x01UL << ARM_NAND_POWER_VCCQ_Pos) |
VCCQ I/O Power off.
| #define ARM_NAND_POWER_VCCQ_3V3 (0x02UL << ARM_NAND_POWER_VCCQ_Pos) |
VCCQ = 3.3V.
| #define ARM_NAND_POWER_VCCQ_1V8 (0x03UL << ARM_NAND_POWER_VCCQ_Pos) |
VCCQ = 1.8V.
| #define ARM_NAND_POWER_VPP_OFF (1UL << 6) |
VPP off.
| #define ARM_NAND_POWER_VPP_ON (1UL << 7) |
VPP on.
| #define ARM_NAND_BUS_INTERFACE_Pos 4 |
| #define ARM_NAND_BUS_INTERFACE_Msk (0x03UL << ARM_NAND_BUS_INTERFACE_Pos) |
| #define ARM_NAND_BUS_TIMING_MODE_Pos 0 |
| #define ARM_NAND_BUS_TIMING_MODE_Msk (0x0FUL << ARM_NAND_BUS_TIMING_MODE_Pos) |
| #define ARM_NAND_BUS_DDR2_DO_WCYC_Pos 8 |
| #define ARM_NAND_BUS_DDR2_DO_WCYC_Msk (0x0FUL << ARM_NAND_BUS_DDR2_DO_WCYC_Pos) |
| #define ARM_NAND_BUS_DDR2_DI_WCYC_Pos 12 |
| #define ARM_NAND_BUS_DDR2_DI_WCYC_Msk (0x0FUL << ARM_NAND_BUS_DDR2_DI_WCYC_Pos) |
| #define ARM_NAND_ECC_INDEX_Pos 0 |
| #define ARM_NAND_ECC_INDEX_Msk (0xFFUL << ARM_NAND_ECC_INDEX_Pos) |
| #define ARM_NAND_CODE_CMD1_Pos 0 |
| #define ARM_NAND_CODE_CMD1_Msk (0xFFUL << ARM_NAND_CODE_CMD1_Pos) |
| #define ARM_NAND_CODE_CMD2_Pos 8 |
| #define ARM_NAND_CODE_CMD2_Msk (0xFFUL << ARM_NAND_CODE_CMD2_Pos) |
| #define ARM_NAND_CODE_CMD3_Pos 16 |
| #define ARM_NAND_CODE_CMD3_Msk (0xFFUL << ARM_NAND_CODE_CMD3_Pos) |
| #define ARM_NAND_CODE_ADDR_COL1_Pos 0 |
| #define ARM_NAND_CODE_ADDR_COL1_Msk (0xFFUL << ARM_NAND_CODE_ADDR_COL1_Pos) |
| #define ARM_NAND_CODE_ADDR_COL2_Pos 8 |
| #define ARM_NAND_CODE_ADDR_COL2_Msk (0xFFUL << ARM_NAND_CODE_ADDR_COL2_Pos) |
| #define ARM_NAND_CODE_ADDR_ROW1_Pos 0 |
| #define ARM_NAND_CODE_ADDR_ROW1_Msk (0xFFUL << ARM_NAND_CODE_ADDR_ROW1_Pos) |
| #define ARM_NAND_CODE_ADDR_ROW2_Pos 8 |
| #define ARM_NAND_CODE_ADDR_ROW2_Msk (0xFFUL << ARM_NAND_CODE_ADDR_ROW2_Pos) |
| #define ARM_NAND_CODE_ADDR_ROW3_Pos 16 |
| #define ARM_NAND_CODE_ADDR_ROW3_Msk (0xFFUL << ARM_NAND_CODE_ADDR_ROW3_Pos) |
